GB 12260-1990 人工心肺机 滚压式血泵
作者:标准资料网 时间:2024-05-09 18:27:01 浏览:8028
来源:标准资料网
基本信息
| 标准名称： | 人工心肺机 滚压式血泵 |
| 英文名称： | Artificial heart-lung machine--Roller pump |
| 中标分类： |
医药、卫生、劳动保护 >>
医疗器械 >>
体外循环、人工脏器、假体装置 |
| ICS分类： |
医药卫生技术 >>
医疗设备 >>
治疗设备
|
| 替代情况： | WS 2-297-1983;被GB 12260-2005代替 |
| 发布日期： | 1990-01-08 |
| 实施日期： | 1990-09-01 |
| 首发日期： | 1990-01-08 |
| 作废日期： | 2005-09-01 |
| 归口单位： | 国家食品药品监督管理局 |
| 起草单位： | 广东医用器械质检中心 |
| 出版日期： | 1900-01-01 |
| 页数： | 0 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 医药 卫生 劳动保护 医疗器械 体外循环 人工脏器 假体装置 医药卫生技术 医疗设备 治疗设备
【英文标准名称】:Detailspecificationforcoldweldedsealquartzcrystalunitsforoscillatorapplications-DN,DQandDPenclosures,50to125MHzfrequencyrange-Fifthovertonethickness-shearmode,AT-cut,foroperationoverwidetemperatureranges(non-temperature
【原文标准名称】:振荡器用冷焊密封石英晶体振子详细规范.DN、DQ和DP外壳、50至125MHz频率规范.宽温范围(非温控)操作用第五谐波厚度剪切模式、晶片AT切割.全面评定级
【标准号】:BS9612N008-1977
【标准状态】:现行
【国别】:英国
【发布日期】:1977-06-15
【实施或试行日期】:1977-06-15
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:额定值;电性质和电现象;电子设备及元件;质量保证体系;检验;晶体谐振器;谐振器;工作范围;共振频率;冷焊;质量管理;额定功率;工作环境;统计质量控制;认可试验;振荡器;电容;介质装置;温度;电气公差;资格鉴定;压电器件;焊接;体积;频率;电阻;尺寸;评估的质量
【英文主题词】:Approvaltesting;Assessedquality;Capacitance;Coldwelding;Crystalresonators;Dielectricdevices;Dimensions;Electricalpropertiesandphenomena;Electricalresistance;Electricaltolerances;Electronicequipmentandcomponents;Environment(working);Frequencies;Inspection;Oscillators;Piezoelectricdevices;Qualificationapproval;Qualityassurancesystems;Qualitycontrol;Ratedpower;Ratings;Resonantfrequency;Resonators;Statisticalqualitycontrol;Temperature;Volume;Welding;Workingrange
【摘要】:Ratings,characteristicsandinspectionrequirements.
【中国标准分类号】:L21
【国际标准分类号】:31_140
【页数】:10P.;A4
【正文语种】:英语
Product Code:SAE J2698
Title:Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design - Truck and Bus
Issuing Committee:Truck And Bus Electrical Systems Committee
Scope:1.1This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off. The power supply comes from alternative sources such as land-based grid power, DC-AC inverters and auxiliary power generators. The circuits may also provide power to improve vehicle performance through charging batteries or operating cold-weather starting aids.1.2This document is not intended to provide guidance for electric or hybrid electric vehicle wiring circuits. Refer to SAE J1673 for high voltage automotive wiring assembly design.1.3Engine block heaters are 120 VAC devices that are used on a multitude of vehicle platforms in addition to trucks with sleeper cabs. Generally, the engine block heater circuit is wired independent of hotel loads. SAE J2698 does not apply to independently wired engine block heater circuits. Engine block heaters that are integrated with hotel loads are subject to the guidelines in this recommended practice.1.4It is understood that drivers may choose to operate 120 VAC devices with the truck moving or at rest. For example, a passenger may operate the microwave or watch television and need to operate an inverter. The environment that these devices are operated in can also vary with exterior ambient temperature extremes. Exposure to oil and vibration are other elements that typical household 120 VAC wiring would not normally be exposed to; therefore, the construction of this power distribution is made more robust for a mobile trucking environment. Driver interaction with the 120 VAC power through use of appliances or connection of cord sets requires special attention to safety aspects dictated in regulatory standards from Nationally Recognized Testing Laboratories (NRTLs) approved labs like Underwriter?s Laboratories (UL), Canadian Standards Association (CSA) or from the National Electric Code (NEC) that are not common practice with typical 12 VDC vehicle wiring. This recommended practice supports that all electrical materials, devices, components, appliances, fittings and equipment shall be Listed, Labeled or Certified to UL and CSA standards and shall be connected in an approved manner when installed. Detailed requirements are listed hereafter.
